Emulex Drivers For Vmware Esxi User Manual Average ratng: 9,4/10 5525 reviews
  1. Vmware User Guide
  2. Esxi Driver Installation
Vmware update drivers

VMware ESXi 6.0 lpfc 11.1.183.633 FC Driver for Emulex and OEM Branded Adapters This driver enables support for Emulex’s Fiber Channel LPe31000(DID:E300) and LPe32000(DID:E300), LPe16000(DID:e200),LPe12000(DID:f100) series adapters.Emulex VID:10df.

Printable version

* RECOMMENDED * Emulex(BRCM) Fibre Channel over Ethernet driver for VMware vSphere 6.7

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Software - Storage Fibre Channel and Fibre Channel Over Ethernet
Version:2019.03.03(25 Jul 2019)
Operating System(s): VMware vSphere 6.7
Multi-part download
File name:cp040416.compsig (2.0 KB)
File name:cp040416.zip (1.1 MB)
VMware vSphere 6.7 Fibre Channel over Ethernet Driver kit for HPE Emulex(BRCM) Converged Network Adapters

Prerequisites:

Please consult SPOCK for a list of supported configurations available at the following link:

Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.

It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.

To obtain the guide:

  1. Go to http://www.hpe.com/support/manuals
  2. Using the HPE model number as your guide, enter the adapter model number in the Search products box, and then click >>.

This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.

Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.

If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:

#esxcli software vib remove lpfc

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

9712c3d5c75daf20560bb9b49f6f4ab1fa37b84a51dd6b8cf51adf35b7a90bcacp040416.zip
d5ea031931cbce8a639b488ef785be07d9795838c05c5e58e063ca30c2e982a4cp040416.compsig

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

View and Download Samsung GALAXY S8 user manual online. GALAXY S8 Cell Phone pdf manual download. Also for: Galaxy s8+. Samsung Galaxy S8 Camera. Samsung Galaxy S8 packs a 12-megapixel primary camera on the rear and a 8-megapixel front shooter for selfies. The f1.7 lenses have Smart Optical Image Stabilization, Real-Time HDR mode and other features for taking great photos. User manual for samsung galaxy s8 plus.

Installation:

To use Smart Update Manager from the Service Pack for ProLiant:

Remote Online, if the component is supported by SUM but is not yet part of an SPP:

  • Download the appropriate Service Pack for ProLiant
  • Add the component to the Service Pack for ProLiant
  • Mount the Service Pack for ProLiant on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
  • Run Smart Update Manager via launch_sum.bat for Windows or launch_sum.sh for Linux
  • Add the ESXi host to be updated as a remote target/node
  • Enter the IP or DNS address of the ESXi host to be updated
  • Enter the ESXi host credentials (root or administrator username and password)
  • For Smart Update Manager 6.0 and newer, select both the Additional Package with the added component and the Service Pack for ProLiant Baseline on the node Inventory page.
  • Follow Smart Update Manager Steps and complete the firmware update.
  • Refer to the Service Pack for ProLiant Documentation for detailed instructions at: www.hpe.com/servers/spp/download

To update the driver using VMware tools:

  • Unzip this HPE component to extract the driver offline bundle
  • Use VMware Vsphere Update Manager(VUM) or esxcli commands to install the offline bundle.
  • Refer to VMware documentation for information on Vsphere Update Manager(VUM) and the esxcli commands

End User License Agreements:
HPE Software License Agreement v1

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:

This component is intended to be used by HPE applications. It is a zip that contains the same driver deliverable available from the vmware.com and the HPE vibsdepot.hpe.com webpages, plus an HPE specific CPXXXX.xml file.

Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.

It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.

To obtain the guide:

  1. Go to http://www.hpe.com/support/manuals
  2. Using the HPE model number as your guide, enter the adapter model number in the Search products box, and then click >>.

This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.

Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.

If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:

#esxcli software vib remove lpfc

Supported Devices and Features:

This component is supported on following Emulex Converged Network Adapters:

XE100 Series:

  • HP StoreFabric CN1200E Dual Port Converged Network Adapter
  • HP FlexFabric 20Gb 2-port 650FLB Adapter
  • HP FlexFabric 20Gb 2-port 650M Adapter
  • HPE StoreFabric CN1200E-T Adapter

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Servers do not complete the process to connect to OneConnectManager Management Host On Windows 2008/ 2012 and 2016

This component is intended to be used by HPE applications. It is a zip that contains the same driver deliverable available from the vmware.com and the HPE vibsdepot.hpe.com webpages, plus an HPE specific CPXXXX.xml file.

Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.

It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.

To obtain the guide:

  1. Go to http://www.hpe.com/support/manuals
  2. Using the HPE model number as your guide, enter the adapter model number in the Search products box, and then click >>.

This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.

Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.

If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:

#esxcli software vib remove lpfc

Version:2019.03.03 (25 Jul 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Servers do not complete the process to connect to OneConnectManager Management Host On Windows 2008/ 2012 and 2016

.Updated to Driver version 12.0.1216.4


Version:2019.03.01 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Added workaround to reduce the race probability in Input Output Device Management (IODM).
  • VMWare vSphere 6.7 Update 1 becomes unresponsive to commands like “esxtop” and “esxcli storage core adapter list” after vmkfstool bus and target reset.
  • Fixed Purple Screen of Death (PSOD) Triggered by assert that when destroying a Slab and there was still one object not released.

Added support for VMWare vSphere 6.7 Update 1.

Updated to Driver version 12.0.1211.0


Version:2018.11.01 (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated to Driver version 12.0.1115.0


Version:2018.06.01 (27 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated to Driver version 12.0.1115.0


Version:2018.02.01 (19 Apr 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial release supporting VMware vSphere 6.7

Driver version 12.0.1113.0


Type:Software - Storage Fibre Channel and Fibre Channel Over Ethernet
Version:2019.03.03(25 Jul 2019)
Operating System(s):
VMware vSphere 6.7

Description

VMware vSphere 6.7 Fibre Channel over Ethernet Driver kit for HPE Emulex(BRCM) Converged Network Adapters

Enhancements

Installation Instructions

Prerequisites:

Please consult SPOCK for a list of supported configurations available at the following link:

Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.

It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.

To obtain the guide:

  1. Go to http://www.hpe.com/support/manuals
  2. Using the HPE model number as your guide, enter the adapter model number in the Search products box, and then click >>.

This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.

Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.

If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:

#esxcli software vib remove lpfc

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

9712c3d5c75daf20560bb9b49f6f4ab1fa37b84a51dd6b8cf51adf35b7a90bcacp040416.zip
d5ea031931cbce8a639b488ef785be07d9795838c05c5e58e063ca30c2e982a4cp040416.compsig

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:

To use Smart Update Manager from the Service Pack for ProLiant:

Remote Online, if the component is supported by SUM but is not yet part of an SPP:

  • Download the appropriate Service Pack for ProLiant
  • Add the component to the Service Pack for ProLiant
  • Mount the Service Pack for ProLiant on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
  • Run Smart Update Manager via launch_sum.bat for Windows or launch_sum.sh for Linux
  • Add the ESXi host to be updated as a remote target/node
  • Enter the IP or DNS address of the ESXi host to be updated
  • Enter the ESXi host credentials (root or administrator username and password)
  • For Smart Update Manager 6.0 and newer, select both the Additional Package with the added component and the Service Pack for ProLiant Baseline on the node Inventory page.
  • Follow Smart Update Manager Steps and complete the firmware update.
  • Refer to the Service Pack for ProLiant Documentation for detailed instructions at: www.hpe.com/servers/spp/download

To update the driver using VMware tools:

  • Unzip this HPE component to extract the driver offline bundle
  • Use VMware Vsphere Update Manager(VUM) or esxcli commands to install the offline bundle.
  • Refer to VMware documentation for information on Vsphere Update Manager(VUM) and the esxcli commands

Release Notes

End User License Agreements:
HPE Software License Agreement v1

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:

This component is intended to be used by HPE applications. It is a zip that contains the same driver deliverable available from the vmware.com and the HPE vibsdepot.hpe.com webpages, plus an HPE specific CPXXXX.xml file.

Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.

It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.

To obtain the guide:

  1. Go to http://www.hpe.com/support/manuals
  2. Using the HPE model number as your guide, enter the adapter model number in the Search products box, and then click >>.

This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.

Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.

If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:

#esxcli software vib remove lpfc

Supported Devices and Features:

This component is supported on following Emulex Converged Network Adapters:

XE100 Series:

  • HP StoreFabric CN1200E Dual Port Converged Network Adapter
  • HP FlexFabric 20Gb 2-port 650FLB Adapter
  • HP FlexFabric 20Gb 2-port 650M Adapter
  • HPE StoreFabric CN1200E-T Adapter

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Servers do not complete the process to connect to OneConnectManager Management Host On Windows 2008/ 2012 and 2016

Important

This component is intended to be used by HPE applications. It is a zip that contains the same driver deliverable available from the vmware.com and the HPE vibsdepot.hpe.com webpages, plus an HPE specific CPXXXX.xml file.

Beginning with software release 11.2, Fibre Channel (LightPulse) adapters and Converged Network adapters (OneConnect) have independent software kits.

It is highly recommended that you review the Broadcom Software Kit Migration User Guide for more detailed information regarding this change.

To obtain the guide:

  1. Go to http://www.hpe.com/support/manuals
  2. Using the HPE model number as your guide, enter the adapter model number in the Search products box, and then click >>.

This document provides special instructions and considerations for using the driver kits for FC and CNA adapters.

Special cases include those in which pre-11.2 (original) drivers and applications are replaced by the new 11.2 drivers and applications, and cases in which inbox drivers are replaced by the new 11.2 out-of-box (OOB) drivers.

If the server contains only CNA adapters and lpfc driver is already been installed, post the new driver update, please remove the lpfc driver using the following command:

#esxcli software vib remove lpfc

Revision History

Version:2019.03.03 (25 Jul 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Servers do not complete the process to connect to OneConnectManager Management Host On Windows 2008/ 2012 and 2016

.Updated to Driver version 12.0.1216.4


Version:2019.03.01 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Added workaround to reduce the race probability in Input Output Device Management (IODM).
  • VMWare vSphere 6.7 Update 1 becomes unresponsive to commands like “esxtop” and “esxcli storage core adapter list” after vmkfstool bus and target reset.
  • Fixed Purple Screen of Death (PSOD) Triggered by assert that when destroying a Slab and there was still one object not released.

Added support for VMWare vSphere 6.7 Update 1.

Updated to Driver version 12.0.1211.0


Version:2018.11.01 (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated to Driver version 12.0.1115.0


Version:2018.06.01 (27 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated to Driver version 12.0.1115.0


Version:2018.02.01 (19 Apr 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial release supporting VMware vSphere 6.7

Driver version 12.0.1113.0


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Vmware User Guide

Vmware workstation user manual

Esxi Driver Installation

  • Download VMware vSphere. Run fewer servers and reduce capital and operating costs using VMware vSphere to build a cloud computing infrastructure. All Downloads; VMware vSphere; VMware ESXi 6.5 lpfc 11.1.233.0 FC/FCoE Driver for Emulex and OEM Branded Adapters; Download VMware ESXi 6.5 lpfc 11.1.233.0 FC/FCoE Driver for Emulex and OEM.
  • Emulex OneCommand Manager 5.0 Pdf User Manuals. View online or download Emulex OneCommand Manager 5.0 User Manual. Manuals; Brands; Emulex Manuals. In A VMware ESX Server With An Existing HBAnyware CLI Kit Installed 17. Emulex Driver For Linux And OneCommand Manager Application Situations 219.
  • . RECOMMENDED. Emulex Fibre Channel driver component for VMware vSphere 6.5. By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a.