Extron Dmp 128 Plus User Manual
- Extron Dmp 128 Plus
- Dmp User Manual
- Dmp 128 Extron
- Extron Dmp
- Extron Dmp 128 Plus Manual
- Dmp 128 Plus
- Extron Dmp 128 Plus
User Guide Audio Products Mixers and Processors DMP 64 Digital Matrix Processor 68-1790-01 Rev. Safety Instructions Safety Instructions. English WARNING: This symbol, when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
Page 1 Product Category DMP 128. Setup Guide This guide provides basic instructions for an experienced technician to install the DMP 128 ProDSP Digital Matrix Processor. For additional information ™ and specifications, see the DMP 128 product page at www.extron.com. Disconnect Power and Mount the DMP 128 Disconnect power to the DMP 128 and turn off all. The Extron DMP 128 Digital Matrix Processor is a 12x8 audio mixer featuring Extron ProDSP™, automixing, available AEC plus Dante™ audio networking, FlexInputs to process Dante channels in place of local mic/line inputs. The DMP 128 Series offers a configuration approach to DSP that simplifies mixing, routing, conferencing, and room. The DMP 128 Plus Series is the next generation of Digital Matrix Processors featuring Extron ProDSP™ 64-bit floating point technology. The DMP 128 Plus Series is equipped with 12 analog mic/line inputs, eight analog outputs, up to four channels of digital audio input and output via USB, up to eight audio file players, an ACP bus for audio control panels, and new configurable macros.
4
Extron Headquarters
+800.633.9876 Inside USA/Canada Only
Extron USA - West
Extron USA - East
+1.714.491.1500 +1.919.850.1000
+1.714.491.1517 FAX
+1.919.850.1001 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Extron Korea
+82.2.3444.1571
+82.2.3444.1575 FAX
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
+91.80.3055.3737 FAX
©
2013 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.
68-2036-50
Rev. C 10 13
Dante Network Audio Setup
The following is the recommended procedure for configuring DMP 128 AT models on a Dante network.
Extron Dmp 128 Plus
NOTE:
A connection to both the Dante (AT) Ethernet switch and the DMP 128 LAN port is required to follow this setup
Dmp User Manual
procedure. If the control computer has only one Ethernet port, connect it to a rear panel AT port (item
j
on page 2). Then
connect a short CAT 5 cable from the LAN port (item
ç
on page 2) to an unused AT port (item
j
on page 2). Alternately use
an Ethernet switch to connect the control computer to both the LAN and AT ports.
1.
clearly illustrated so that performing repairs is as easy and quick as possible. explains essential diagnostic terminology and basic testing procedures. Please peruse and utilize this manual fully to ensure complete repair work for satisfying our customers by keeping their vehicle in optimum condition. When replacement of parts during repair work is needed, be sure to use genuine parts.Farmall 460, 560, Hi-Clear, IH 560 Tractor Operators Manual & Shop Repair -2- Manuals – DOWNLOAD Features:. function as exceptional diagnostic companions when analyzing automotive drive-train performance problems. Free download farmall 560 repar manual.
Connect the control computer to an AT (Dante) port on the DMP 128. Also connect the control computer to the DMP 128 LAN
port (see Note above).
2.
Start DSP Configurator in
Live mode (see steps 1, 2, and 3b of
on the previous page).
3.
From the DSP Configurator toolbar, select
Tools>DeviceSettings.
4.
In the
UnitName: field, enter a descriptive name for the DMP 128 (typically the device name and location) that enables it to
be easily identified on the network.
5.
Click
Apply, then close the dialog box.
6.
From the DSP Configurator toolbar, select
NetworkAudioControl. If Dante Controller does not launch, see the
section on the previous page.
7.
From Dante Controller toolbar, select
Device>Device View.
8.
Choose the Dante device. The DMP 128 appears as
DMP128, plus the last six digits of the Dante MAC address.
NOTE:
Connect DMP 128 units to the Dante network one at a time to easily identify the units. To confirm the proper
device is configured, compare the Dante MAC address printed on the rear of the unit with the MAC address in the
DeviceView.
9.
Select the
DeviceConfig tab in Dante Controller.
10.
Rename the device to match the DSP 128 name given in DSP Configurator (see step 4 above), then press <Enter>.
11.
Select
Yes to confirm the new name.
12.
To connect additional DMP 128 units, repeat this procedure with the next device.
See the Dante Controller section in the DMP 128 User Guide for operation of the controller software.
Telephone Ports (DMP 128 C P and DMP 128 C P AT only)
The DMP 128 provides a telephone interface with separate input and output signal processing paths (labeled “
Telephone Rx”
and “
Telephone Tx” on the DSP Configurator main screen on the previous page). The country code must be entered before
attaching the DMP 128 to a phone system.
To set or change the country code of a phone model:
1.
Follow Steps 1 and 2 from
on the previous page, then select
Live in the Mode box.
NOTE:
The device settings dialog can be accessed only in Live mode.
2002 nissan altima user's manual. Original Factory 2002 Nissan Altima Service Repair Manual is a Complete Informational Book. 2002 Nissan Altima Service Repair Manual DOWNLOAD.1.2002 Nissan Altima Service Repair ManualDOWNLOADINSTANT DOWNLOADOriginal Factory 2002 Nissan Altima Service Repair Manual is aComplete Informational Book. This Service Manual has easy-to-readtext sections with top quality diagrams and instructions. Trust 2002 Nissan Altima Service Repair Manual will give you everything you need to do the job. This Service Manual has easy-to-read text sections with top quality diagrams and instructions.
2.
From the main DSP Configurator menu , select
Tools>DeviceSettings.
Dmp 128 Extron
3.
Extron Dmp
From the
DeviceSettings dialog, select the PhoneSettings tab (see diagram at
right).
Extron Dmp 128 Plus Manual
4.
If the correct country code is not listed under
Selected Country:, click Change
Phone’sCountryCode, then select the correct country code for your region from the
dropdown list.
5.
Click
Apply, then close the dialog box.
Dmp 128 Plus
See the DMP 128 User Guide for operating details of the phone modem.