1. Silica Fume For Sale
2. Silica Fume Suppliers
3. Silica Fume Uses
4. Silica Fume In Concrete

• The Silica Fume Association Users Manual for information on the appropriate set up for pumping and handling silica fume into silos. Packaged MasterLife SF 100 silica fume admixture must be stored in a dry area. MasterLife SF 100 silica fume admixture requires no special dispensing equipment.
• NCBC Resources Resources from the National Concrete Bridge Council Members. Silica Fume Association. Silica Fume User’s Manual. Wire Reinforcement Institute. Technical library. Technical Library: Design and Use of Structural Welded Wire and Wire Reinforcement.

Silica fume, also known as microsilica, (CAS number 69012-64-2, EINECS number 273-761-1) is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 nm. The main field of application is as pozzolanic material for high performance concrete.

It is sometimes confused with fumed silica (also known as pyrogenic silica, CAS number 112945-52-5). However, the production process, particle characteristics and fields of application of fumed silica are all different from those of silica fume.

• 4Applications

Life-365 Software/User Manual Download. Life-365 is a standard model developed for predicting the Service Life and Life-Cycle Cost of Reinforced Concrete exposed to chlorides. An industry consortium consisting of National Ready mixed Concrete Association, Concrete Corrosion Inhibitor Association, Slag Cement Association and the Silica Fume.

Hard to believe that something so petite succeded in packing such a mighty punch.dBTechnologies DVA-T8 3-Way Active Line Array Module is a 3-way module equipped with a 8” bass reflex neodymium woofer, 1 horn loaded 6.5” midrange with a 2” voice coil and phase plug device, and two 1”drivers with constant directivity horn. Db technologies dva t8 manual. DBTechnologies DVA-T8 3-Way Active Line Array ModuledBTechnologies DVA-T8 3-Way Active Line Array Module is the latest and most advanced incarnation of a string of successful line array systems that started with the DVA T4 and enhanced with DVA T12. These components have been optimally arranged to obtain a uniform 100° by 15° coverage per module.

History[edit]

Procedures for Central and truck mixing as outlined in the Silica Fume Association Users Manual and ASTM C94/C94M must be followed. Limitations: Do not introduce repulpable bags into concrete mixes with low watercementitious ratios and smaller size aggregates as these mixes may not develop sufficient mixing energy to fully repulp the bags. Articles on Silica Fume concrete from industry publications, relevant ACI Committee documents and ASTM's specification for silica fume. Silica Fume Users Manual Crack-Free Concrete Finishing Videos Reprints & Docs HPC Bridge Views. Related Links. The Silica Fume Association 38860 Sierra Lane, Lovettsville, VA 20180 Tel: 540.822.9455 Fax.

The first testing of silica fume in Portland-cement-based concretes was carried out in 1952. The biggest drawback to exploring the properties of silica fume was a lack of material with which to experiment. Early research used an expensive additive called fumed silica, an amorphous form of silica made by combustion of silicon tetrachloride in a hydrogen-oxygen flame. Silica fume on the other hand, is a very fine pozzolanic, amorphous material, a by-product of the production of elemental silicon or ferrosilicon alloys in electric arc furnaces. Before the late 1960s in Europe and the mid-1970s in the United States, silica fumes were simply vented into the atmosphere.

With the implementation of tougher environmental laws during the mid-1970s, silicon smelters began to collect the silica fume and search for its applications. The early work done in Norway received most of the attention, since it had shown that Portland cement-based-concretes containing silica fumes had very high strengths and low porosities. Since then the research and development of silica fume made it one of the world's most valuable and versatile admixtures for concrete and cementitious products.

Properties[edit]

Silica fume is an ultrafine material with spherical particles less than 1 μm in diameter, the average being about 0.15 μm. This makes it approximately 100 times smaller than the average cement particle.^[4] The bulk density of silica fume depends on the degree of densification in the silo and varies from 130 (undensified) to 600 kg/m³. The specific gravity of silica fume is generally in the range of 2.2 to 2.3. The specific surface area of silica fume can be measured with the BET method or nitrogen adsorption method. It typically ranges from 15,000 to 30,000 m²/kg.^[5]

Production[edit]

Silica fume is a byproduct in the carbothermic reduction of high-purity quartz with carbonaceous materials like coal, coke, wood-chips, in electric arc furnaces in the production of silicon and ferrosilicon alloys.

Applications[edit]

Concrete[edit]

Because of its extreme fineness and high silica content, silica fume is a very effective pozzolanic material.^[6][7] Standard specifications for silica fume used in cementitious mixtures are ASTM C1240,^[8] EN 13263.^[9]

Silica fume is added to Portland cementconcrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.^[10]

Addition of silica fume also reduces the permeability of concrete to chlorideions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.^[11]

Prior to the mid-1970s, nearly all silica fume was discharged into the atmosphere. After environmental concerns necessitated the collection and landfilling of silica fume, it became economically viable to use silica fume in various applications, in particular high-performance concrete.^[12]Effects of silica fume on different properties of fresh and hardened concrete include:

• Workability: With the addition of silica fume, the slump loss with time is directly proportional to increase in the silica fume content due to the introduction of large surface area in the concrete mix by its addition. Although the slump decreases, the mix remains highly cohesive.
• Segregation and bleeding: Silica fume reduces bleeding significantly because the free water is consumed in wetting of the large surface area of the silica fume and hence the free water left in the mix for bleeding also decreases. Silica fume also blocks the pores in the fresh concrete so water within the concrete is not allowed to come to the surface.

Silicon carbide[edit]

The silica fumes, as byproduct, may be used to produce silicon carbide. Braun pulsonic clean charge base unit user manual.

See also[edit]

• Energetically modified cement (EMC)

References[edit]

1. ^Holland, Terence C. (2005). 'Silica Fume User's Manual'(PDF). Silica Fume Association and United States Department of Transportation Federal Highway Administration Technical Report FHWA-IF-05-016. Retrieved October 31, 2014.
2. ^Kosmatka, S.; Kerkhoff, B.; Panerese, W. (2002). Design and Control of Concrete Mixtures (14 ed.). Portland Cement Association, Skokie, Illinois.
3. ^Gamble, William. 'Cement, Mortar, and Concrete'. In Baumeister; Avallone; Baumeister (eds.). Mark's Handbook for Mechanical Engineers (Eighth ed.). McGraw Hill. Section 6, page 177.
4. ^'Chapter 3 Fly Ash,Slag,Silica Fume,and Natural Pozzolans'(PDF). The University of Memphis.
5. ^'Silica Fume User's Manual'(PDF). Silica Fume Association.
6. ^ACI Committee 226. 1987b. 'Silica fume in concrete: Preliminary report', ACI Materials Journal March–April: 158–66.
7. ^Luther, M. D. 1990. 'High-performance silica fume (microsilica)—Modified cementitious repair materials'. 69th annual meeting of the Transportation Research Board, paper no. 890448 (January)
8. ^ASTM C1240. Standard Specification for Silica Fume Used in Cementitious Mixtures, http://astm.org
9. ^EN 13263 Silica fume for concrete. http://www.cen.eu
10. ^Detwiler, R.J. and Mehta, P.K., Chemical and Physical Effects of Silica Fume on the Mechanical Behavior of Concrete, Materials Journal Nov. 1989
11. ^Rachel J. Detwiler; Chris A. Fapohunda & Jennifer Natale (January 1994). 'Use of supplementary cementing materials to increase the resistance to chloride ion penetration of concretes cured at elevated temperatures'. Materials Journal.
12. ^ACI 234R-06. Guide to Silica Fume in Concrete, American Concrete Institute

Further reading[edit]

• U.S. Federal Highway Administration. 'Silica Fume'. Archived from the original on 2007-01-22. Retrieved 2007-01-24.
• Portland Cement Association. 'Chapter 3 Fly Ash,Slag,Silica Fume,and Natural Pozzolans'(PDF). Retrieved 2012-04-07.
• Silica Fume Association. 'Silica Fume User's Manual'(PDF). Retrieved 2012-05-05.

Silica Fume For Sale

External links[edit]

1. ^Holland, Terence C. (2005). 'Silica Fume User's Manual'(PDF). Silica Fume Association and United States Department of Transportation Federal Highway Administration Technical Report FHWA-IF-05-016. Retrieved October 31, 2014.
2. ^Kosmatka, S.; Kerkhoff, B.; Panerese, W. (2002). Design and Control of Concrete Mixtures (14 ed.). Portland Cement Association, Skokie, Illinois.
3. ^Gamble, William. 'Cement, Mortar, and Concrete'. In Baumeister; Avallone; Baumeister (eds.). Mark's Handbook for Mechanical Engineers (Eighth ed.). McGraw Hill. Section 6, page 177.

Silica Fume Suppliers

This template has been created for transclusion in the articles Concrete, Cement, and Silica fume. It replaces the file at right.

Silica Fume Uses

That file had been tagged for translation to SVG format, as if it were a graphic. But since it is really a table, I have re-rendered it in wiki markup. This template page is now the only page in the wiki that refers to the file, and here only by way of documenting the provenance of the information.

The references cited in the table have been freshly extracted from the source document of the table.

There should be added a column of the properties of Metakaolin when feasible. Also might be added the properties of the components of Geopolymer.

Silica Fume In Concrete